The dryer starts fine, then stops partway through the cycle and leaves you with damp clothes. A dryer that shuts off mid-cycle is usually telling you it is getting too hot, or a sensor is misreading the load. Some causes are simple to fix. One of them, a blocked vent, is a fire risk you should deal with right away.
Need help fast? Our dryer repair New Braunfels team fixes electric and gas dryers of all major brands.
For help in New Braunfels, call New Braunfels Appliance Fix at (830) 240-5230.

Why does my dryer shut off mid-cycle?
The most common causes are a clogged lint screen or vent, a failing drive motor that overheats, a bad cycling or high-limit thermostat, a dirty moisture sensor, a worn door switch and a control or timer problem. Overheating is the number one cause. A dryer that runs hot and then stops should be checked before you use it again.
Safety first
Unplug the dryer before you pull it out or open any panel. For a gas dryer, also turn off the gas valve. If you smell burning or see scorch marks, stop using the dryer and call.
Common causes and fixes
1. Clogged lint screen or vent
Lint traps heat. When the vent is blocked, the dryer gets too hot and the safety thermostat shuts it off. Clean the lint screen every load and have the vent cleaned at least once a year. Our dryer vent cleaning guide explains how.
2. Overheating drive motor
An old motor with worn bearings can overheat and trip its internal protector. The dryer stops, then may restart after it cools. You may also hear noise; see our guide to a dryer making noise.
3. Bad cycling or high-limit thermostat
These parts control the heat. When one fails, the dryer can shut off too early or run too hot.
4. Dirty moisture sensor
Two metal bars inside the drum sense when clothes are dry. Fabric softener and minerals coat them, so the dryer thinks the load is dry. Wipe them with a soft cloth and a little rubbing alcohol.
5. Worn door switch
If the door switch is loose or worn, a bump or a heavy load shifting can make the dryer think the door opened.
6. Timer or control board
A worn timer or a failing board can end cycles early or stop the dryer at random.
Dryer keeps stopping or running hot? Stop using it and call a local technician today.
Call Now – (830) 240-5230Quick guide: what the symptom tells you
| What you notice | Likely cause | DIY or pro? |
|---|---|---|
| Stops and feels very hot | Blocked vent or lint | Clean screen; vent cleaning |
| Stops, restarts after cooling | Motor overheating | Pro |
| Stops early, clothes still damp | Dirty moisture sensor | DIY cleaning |
| Stops when bumped | Door switch | Pro |
| Stops at random times | Timer or control board | Pro |
What you can check before calling
- Clean the lint screen with warm, soapy water if it looks coated.
- Pull the dryer out and make sure the vent hose isn’t crushed or kinked.
- Go outside and check that the vent flap opens and air flows strongly.
- Wipe the moisture sensor bars inside the drum.
- Try a smaller load to see if the dryer finishes.
If the dryer runs the full cycle but clothes still come out damp, see our guide to a dryer not drying.
How much does dryer repair cost in New Braunfels?
Our diagnostic visit is approx. $90–$100, and it is applied to the repair if you go ahead. Labor runs approx. $50–$95 per hour, plus parts if needed. We confirm the total with you before any work starts. Many mid-cycle shutoffs are fixed by cleaning the vent or replacing a thermostat. We confirm the price before any work starts.
Prices are approximate and depend on your dryer’s brand, model, and the part needed.
Dryer repair in New Braunfels
We repair Whirlpool, Maytag, GE, Samsung, LG and most other dryer brands in Downtown New Braunfels, the Gruene Historic District, Landa Park, Vintage Oaks, Veramendi, and across Comal and Guadalupe Counties. If you are searching for appliance repair in New Braunfels that comes to you, we are a phone call away. Learn more about our dryer repair in New Braunfels.
Not sure if other appliances need attention? Read 7 Signs Your Appliance Needs Repair (Before It Breaks Down).
Frequently Asked Questions
Why does my dryer stop after 10 minutes?
It is often overheating because of a clogged lint screen or vent. A failing motor, thermostat or moisture sensor can also stop it early.
Is it dangerous if my dryer keeps shutting off?
It can be. Overheating is a warning sign of a blocked vent, which is a fire risk. Stop using the dryer until the vent is cleaned.
Can a dryer shut off because of a clogged vent?
Yes. A blocked vent traps heat, and the dryer’s safety thermostat turns the heat or the whole dryer off to prevent a fire.
Why does my dryer stop when it’s only half dry?
The moisture sensor may be dirty and reading the clothes as dry. Clean the metal sensor bars inside the drum with a soft cloth.
How much does dryer repair cost in New Braunfels?
Our diagnostic visit is approx. $90–$100, applied to the repair if you go ahead. Labor runs approx. $50–$95 per hour plus parts. You get the price before work starts.
Get your appliance working again
Call New Braunfels Appliance Fix at (830) 240-5230 or send us a message on our contact page. We will confirm the price before any work starts.
Talk to a local appliance technician today.
Call Now – (830) 240-5230