Skip to main content

newbraunfelsappliancefix.com

An oven that will not heat is a big problem in any New Braunfels kitchen, and it always seems to happen right before a family dinner or a holiday meal. The good news is that most cases come down to one of a few parts, and some causes you can check yourself in a few minutes. This guide covers gas and electric ovens.

If you would rather have it checked, our oven and stove repair New Braunfels technicians work on Whirlpool, GE, Samsung, LG, Frigidaire, KitchenAid and other brands.

For help in New Braunfels, call New Braunfels Appliance Fix at (830) 240-5230.

Why is my oven not heating up?

An oven needs three things to heat: power or gas, a working heat source (the bake element or the igniter and burner), and a control that tells it when to turn on. When one of those fails, the display often still lights up, which makes the problem confusing. The table below shows the usual causes.

CauseSignsDIY or repair
Bake element (electric)No heat on bake, broil still works; element has a blister, crack or no glowRepair
Igniter (gas)Igniter glows for over 90 seconds but the burner never lightsRepair
Temperature sensorOven heats but runs 25°F or more off, or shows an error codeRepair
Tripped breaker or half powerDisplay on, cooktop partly works, oven stays coldDIY check
Gas supplyBurners and oven both dead, or valve behind the range closedDIY check
Control board or relayNo heat with good parts, clicking with no result, random codesRepair
Thermal fuseOven dead after a self-clean cycleRepair
Settings (delay bake, Sabbath, demo mode)Display looks normal but nothing heatsDIY check

Check these first (5 minutes)

  • Look at the settings. Make sure delay bake, timed cook, Sabbath mode or a store demo mode is not on. Your manual explains how to cancel them.
  • Check the breaker. Electric ranges use a double breaker. If one half trips, the clock can stay on while the oven will not heat. Switch it fully off, then back on.
  • Check the gas. On a gas range, see if the cooktop burners light. If they do not, check that the shutoff valve behind the range is open (handle in line with the pipe).
  • Try a power reset. Unplug the range or turn off the breaker for 1 to 5 minutes. This can clear a stuck control.

Electric oven: the bake element

The bake element is the loop at the bottom of the oven. Turn the oven to bake and wait a few minutes. A working element glows red. If it stays dark, or you see a blister, split or burned spot on it, the element has likely failed. If the broiler works but bake does not, the element is the first suspect.

Gas oven: the igniter

Most gas ovens use a glow bar igniter. It has to get hot enough to open the gas valve. As it ages, it still glows but draws too little current, so the burner never lights. If the igniter glows for more than about 90 seconds with no flame, it usually needs replacing. If you smell gas at any point, stop, leave the house and call your gas company or 911 from outside.

Oven heats, but not to the right temperature

If the oven warms up but food takes much longer to cook, the temperature sensor may be reading wrong. Place an oven thermometer in the middle rack, set 350°F and check after 20 minutes. A difference of 25°F or more points to the sensor or the control. Many ovens also let you adjust the temperature offset in the settings menu.

Oven stopped heating after self-clean

The self-clean cycle runs very hot. It can blow a thermal fuse, burn out an element or leave the door lock stuck. If your oven quit right after cleaning, see our guide on oven self-clean problems. Cooktop trouble is covered in stove burner not working.

When to call a technician

  • The element or igniter looks fine but the oven still will not heat.
  • The oven shows an error code that comes back after a reset.
  • You hear clicking from the control but nothing heats.
  • You smell gas or see scorch marks on wires or the back panel.

Do not run a gas oven with the door open or use it to heat the house. It can release carbon monoxide.

Oven repair cost in New Braunfels

Our diagnostic visit is approx. $90–$100, and it is applied to the repair if you go ahead. Labor runs approx. $50–$95 per hour, plus parts if needed. We confirm the total with you before any work starts. Bake elements, igniters and temperature sensors are common repairs. A control board costs more, and we will tell you whether repair makes sense for your range. We serve Downtown New Braunfels, the Gruene Historic District, Landa Park, Vintage Oaks, Veramendi, and across Comal and Guadalupe Counties.

Frequently Asked Questions

Why is my oven on but not heating?

The most common reasons are a burned-out bake element on electric ovens and a weak igniter on gas ovens. A tripped breaker, a closed gas valve or a delay bake setting can also leave the display on while the oven stays cold.

Can I still use the broiler if the bake element is out?

You can for short broiling jobs, but do not use the broiler to bake. It heats from the top only, burns food and puts extra load on the broiler element.

How long should a gas oven igniter glow before it lights?

A healthy igniter usually lights the burner within about 60 to 90 seconds. If it glows longer than that and the flame never comes on, the igniter is likely too weak to open the gas valve.

Is an oven that is not heating worth repairing?

Usually yes. Bake elements, igniters and sensors are some of the most common and affordable oven repairs. A control board costs more, and we will tell you if replacement makes more sense for an older range.

Get your oven working again

Call New Braunfels Appliance Fix at (830) 240-5230 or send us a message on our contact page. We will confirm the price before any work starts.

Talk to a local appliance technician today.

Call Now – (830) 240-5230

Leave a Reply

Your email address will not be published. Required fields are marked *