You turn the knob and hear clicking, but the gas never lights. Or one electric burner stays cold while the others glow red. A stove burner not working slows down every meal, but the fix is often simple.
This guide covers the common causes for gas burners, electric coil burners, and glass cooktops, plus when to call a pro. For fast help in New Braunfels, call New Braunfels Appliance Fix at (830) 240-5230.
Why is my stove burner not working?
On a gas stove, a burner usually will not light because the cap is out of place, the ports are clogged, or the igniter is wet or dirty. On an electric coil stove, the coil is often loose or burned out. On a glass cooktop, the radiant element or burner switch has usually failed. Many gas and coil problems can be fixed at home.
Safety first
If you smell gas, turn off every burner, do not touch light switches, leave the house, and call your gas company from outside. For electric stoves, make sure the burner is off and cool before you touch it. Do not take apart the cooktop or controls. Gas stoves also need good air flow. The CPSC carbon monoxide information center explains why a working CO alarm matters in any home with gas appliances.
Gas burner problems and fixes
1. Burner cap out of place
The cap must sit flat and centered on the burner base. If it is tilted even a little after cleaning, gas cannot spread evenly and will not light. Lift it off and set it back in place.
2. Clogged burner ports
Boil-overs and grease clog the small holes around the burner. Remove the cap and head, then clear each hole with a straight pin or paper clip. Do not use a toothpick, as it can break off inside.
3. Wet or dirty igniter
The igniter is the small white ceramic tip next to the burner. If it is wet or coated with food, the spark is weak. Wipe it gently with a dry cloth or old toothbrush and let the burner dry for a few hours.
4. Bad spark switch or module
If no burner clicks, or one keeps clicking non-stop, the spark switch or spark module may have failed. These parts are inside the cooktop and should be replaced by a technician.
5. Weak or yellow flame
A healthy gas flame is mostly blue. A large yellow or orange flame can mean dirty ports or an air mix problem. A weak flame on every burner can mean a gas supply issue. Have it checked if cleaning does not help.
Burner still won’t light? A local technician can fix it.
Call Now – (830) 240-5230Electric burner problems and fixes
Coil burners
- Loose coil: unplug the coil and push it firmly back into its socket.
- Burned-out coil: look for bubbles, cracks, or a dark spot. Swap it with a working coil of the same size to test.
- Bad socket: if a good coil still will not heat in that spot, the socket is likely burned. Look for black marks.
- Bad burner switch: if the coil only works on high, or not at all, the infinite switch behind the knob may have failed.
Glass and smooth-top cooktops
Smooth-top burners use radiant elements under the glass. When one fails, it stays dark. If a burner stays on high, the burner switch has usually failed. A crack in the glass is a safety issue, so stop using that cooktop until it is repaired.
Quick guide: what is wrong with your burner?
| What you notice | Likely cause | DIY or pro? |
|---|---|---|
| Gas clicks, no flame | Cap out of place or clogged ports | DIY |
| Gas keeps clicking | Wet igniter or bad spark switch | DIY dry, then pro |
| No click on any burner | Spark module or power | Pro |
| Coil burner stays cold | Loose or burned-out coil | DIY test |
| Coil works only on high | Bad infinite switch | Pro |
| Glass-top burner stays dark | Failed radiant element | Pro |
How much does stove burner repair cost in New Braunfels?
Our diagnostic visit is approx. $90–$100. It is usually waived or applied to the repair if you go ahead. Labor runs approx. $50–$95 per hour, plus parts if needed. We confirm the total with you before any work starts. Igniters, coil sockets, and burner switches are common repairs. A glass-top radiant element or spark module costs more.
Prices are approximate and depend on your stove’s brand, model, and the part needed.
How to keep your burners working
- Wipe up spills as soon as the burner cools.
- Do not soak gas burner parts without drying them fully before use.
- Use the right size pot for each burner.
- Do not slide heavy pots on a glass cooktop.
- Use a cooktop cleaner made for glass, not harsh scrubbers.
Stove and cooktop repair in New Braunfels
We fix gas and electric ranges, cooktops, and wall ovens from Whirlpool, GE, Samsung, LG, KitchenAid, Frigidaire, Maytag, Bosch, Viking, and most other brands. We serve homes in Downtown New Braunfels, the Gruene Historic District, Landa Park, Vintage Oaks, Veramendi, and across Comal and Guadalupe Counties. Learn more about our oven and stove repair in New Braunfels.
Not sure if other appliances need attention? Read 7 Signs Your Appliance Needs Repair (Before It Breaks Down).
Frequently Asked Questions
Why does my gas burner click but not light?
Clicking with no flame usually means the burner cap is out of place, the burner ports are clogged with food or grease, or the igniter tip is wet or dirty. Make sure the cap sits flat, clean the ports with a pin, and let a wet burner dry before trying again.
Why won’t my gas burner stop clicking?
Constant clicking usually means moisture or grease reached the igniter switch after a spill or cleaning. Turn the burner off and let it dry for several hours. If it keeps clicking, the spark switch or spark module may need to be replaced.
Why is one electric burner not heating?
On a coil cooktop, the coil may be loose in its socket, burned out, or the socket may be damaged. Swap it with a working coil of the same size to test it. If the good coil also fails in that spot, the socket or burner switch is the problem.
Why is my glass cooktop burner not heating?
A smooth-top burner that stays cold often has a failed radiant element, a bad burner switch, or a tripped limiter. A burner that stays on high and will not turn down usually has a failed infinite switch. These need a technician.
How much does stove burner repair cost in New Braunfels?
Our diagnostic visit is approx. $90–$100, usually applied to the repair. Labor runs approx. $50–$95 per hour plus parts. Igniters, coil sockets, and burner switches are common repairs. A glass-top element costs more. You get the price before work starts.
Is it safe to light a gas burner with a match?
Many gas cooktops can be lit with a long match during a power outage, but check your owner’s manual first. Never do it if you smell gas. If you do, turn off all burners, do not use switches, leave the house, and call your gas company from outside.
Get your appliance working again
Call New Braunfels Appliance Fix at (830) 240-5230 or send us a message on our contact page. We will confirm the price before any work starts.
Talk to a local appliance technician today.
Call Now – (830) 240-5230