That tick-tick-tick from a gas stove is the spark igniter trying to light the burner. It should stop as soon as the flame catches. When it keeps going after the burner is lit, or starts on its own with the burners off, something is wrong. Most causes are simple to fix at home.
If cleaning doesn’t stop it, our oven and stove repair in New Braunfels technicians can test the igniters, switches and spark module.
For help in New Braunfels, call New Braunfels Appliance Fix at (830) 240-5230.

Why does my gas stove keep clicking?
A gas stove keeps clicking when the burner is wet, dirty or not seated right, so the flame can’t settle on the igniter. It can also happen when a spark switch behind a knob is stuck, when moisture gets into the switches after cleaning, or when the spark module fails. Start by cleaning and drying the burner and checking the cap.
Safety first
Clicking on its own does not mean gas is leaking. But if you ever smell gas, turn off the burners, don’t flip switches, leave the house and call your gas company or 911 from outside. Before you clean or take parts off, unplug the range or turn off its breaker.
Common causes and fixes
1. Wet burner after a spill or cleaning
Boil-overs and wiping the cooktop can leave water under the burner cap. Remove the cap and base, dry them, and let the area air out for a few hours. Many clicking problems stop once everything is dry.
2. Burner cap out of place
If the cap is crooked or upside down, the flame won’t spread evenly to the igniter. Set the cap flat and centered.
3. Dirty or clogged burner ports
Grease and food block the small holes in the burner. Clean them with a stiff brush or a straightened paper clip. Don’t use a toothpick, which can break off inside.
4. Dirty or cracked igniter
The igniter is the small ceramic tip next to the burner. Wipe it with rubbing alcohol on a cotton swab. A cracked igniter needs replacing.
5. Stuck or wet spark switch
Each knob has a switch behind it. If cleaner or water dripped behind the knobs, the switch can stay on and click even with burners off. Pull the knobs off and let the area dry for a day.
6. Failed spark module
The spark module sends power to all the igniters. If every burner clicks nonstop, or none will spark, the module may be bad. This needs a technician.
Stove still clicking after you’ve dried and cleaned it? Call a local technician today.
Call Now – (830) 240-5230Quick guide: what the clicking tells you
| What you notice | Likely cause | DIY or pro? |
|---|---|---|
| One burner clicks after it lights | Wet, dirty or misaligned burner | DIY: clean and dry |
| Clicking right after cleaning | Moisture in switches | DIY: let it dry 24 hours |
| Clicks with all knobs off | Stuck spark switch | Pro if drying fails |
| All burners click nonstop | Spark module or wiring | Pro |
| No spark at all | Module, igniter or power | Pro |
What you can check before calling
- Remove the burner cap and base and dry them fully.
- Clean the burner ports and the igniter tip.
- Seat the cap flat and centered.
- Pull off the knobs and let the switches dry.
- Check that the range is plugged in and the outlet works.
If a burner won’t light at all, our guide to a stove burner not working covers more causes.
How much does stove repair cost in New Braunfels?
Our diagnostic visit is approx. $90–$100, and it is applied to the repair if you go ahead. Labor runs approx. $50–$95 per hour, plus parts if needed. We confirm the total with you before any work starts. Igniters and spark switches are common, low-cost parts on most ranges.
Stove repair in New Braunfels
We repair GE, Whirlpool, Samsung, LG, Frigidaire, KitchenAid and most other gas ranges and cooktops in Downtown New Braunfels, the Gruene Historic District, Landa Park, Vintage Oaks, Veramendi, and across Comal and Guadalupe Counties. Many homeowners call us as the appliance guys New Braunfels they trust for straight answers. Learn more about our oven and stove repair in New Braunfels.
Not sure if other appliances need attention? Read 7 Signs Your Appliance Needs Repair (Before It Breaks Down).
Frequently Asked Questions
Why does my gas stove keep clicking after the burner is lit?
The igniter keeps sparking when the burner flame isn’t touching the sensor or when moisture or grease is on the burner. Clean and dry the burner and set the cap straight.
Why does my stove click when all burners are off?
A spark switch behind a knob may be stuck or wet. Water from cleaning or a spill often causes it. If drying doesn’t fix it, the switch needs replacing.
Is a clicking gas stove dangerous?
The clicking itself is not a gas leak, but if you smell gas, turn the burners off, leave the home and call your gas company.
Can I replace a stove spark switch myself?
Some homeowners can, but it means working near wiring and gas parts. Unplug the range first, or call a technician.
How much does stove repair cost in New Braunfels?
Our diagnostic visit is approx. $90–$100, applied to the repair if you go ahead. Labor runs approx. $50–$95 per hour plus parts. You get the price before work starts.
Get your appliance working again
Call New Braunfels Appliance Fix at (830) 240-5230 or send us a message on our contact page. We will confirm the price before any work starts.
Talk to a local appliance technician today.
Call Now – (830) 240-5230